Telephone Button Programming
500 Series Programs
Strata CTX Programming - Part 3:Telephone Button Programming 04/03 13-75
Telephone Button
Programming
507-01 DDCB Equipment No.
)%
, xxyyzz,
+ROG
xx = Cabinet 01 (CTX100),
01~02 (CTX670 Basic),
01~07 (CTX670 Exp.)
Enter the DDCB equipment number to which the Door phone should
be assigned.
Example: If the DDCB interface should be connected to a PDKU or
BDKU/BDKS in cabinet shelf 5, slot 2, circuit 3, enter 050203.
Notes
• This is the cabinet, slot, and circuit number of the BDKU/BDKS or
PDKU interface PCB to which the DDCB is to be connected.
• If a PDN is assigned to the DDCB equipment number it must be
deleted, using Program 201, before attempting to assign the
DDCB console.
Cabinet numbers:
• CTX100 – Select 01 for Base and Expansion cabinet.
• CTX670 – Select 01 for Base and 02~07 respectively for each
Expansion cabinet.
Slot numbers:
• CTX100 – Select 01~04 for Base slots and 05~08 for Expansion
slots.
• CTX670 – Select 01~08 for Base slots and 01~10 for Expansion
slots.
yy = Slot 01~8 (CTX100),
01~10 (CTX670)
zz = Circuit 01~16
507-02 Tenant Number
)%
, n,
+ROG
n = 1~2 (CTX100)
1~8 (CTX670) (default = 1)
Select the Tenant Number for which the door phone should ring over
external page in the system Night mode.
507-03 Connection Status n = 1. Enable
2. Disable (default)
Check the box if the door phone is physically connected to the DDCB.
507-04 Ring Duration
)%
, n,
+ROG
n = 3~30
(default = 9)
Select the time that the door phone should ring destination devices
when the door phone button is pressed. The ring time can be 3 to 30
seconds set in 3 second intervals - each 3 second interval provides
one ring to the destination. Destination devices include selected DNs
and Page groups.
507-05 LCD Name Display
)%
, n,
+ROG
n = 1~16 Enter the Door Phone name that should display on LCD telephones
when the door phone rings the telephones; or, when the telephone
calls the door phone.
507-06 Day1 Destination
)%
, n,
6SNU
, n1,
+ROG
n = 1. None (default)
2. DN
3. Paging Group
1~4 (CTX100)
1~8 (CTX670 Basic)
1~16 (CTX670 Exp.)
1. Select Destination Type – Select the type of destination that
should ring when the door phone button is pressed during the
system Day1, Day2 or Night mode.
2. Enter the Destination Number – If the ring destination type is a
PDN or PhDN, enter the directory number. If the ring destination
type is Page, enter the Page Group number.
n1 = Up to 5 digits
507-07 Day2 Destination
)%
, n,
6SNU
, n1,
+ROG
n = 1. None (default)
2. DN
3. Paging Group
1~4 (CTX100)
1~8 (CTX670 Basic)
1~16 (CTX670 Exp.)
1. Select Destination Type – Select the type of destination that
should ring when the door phone button is pressed during the
system Day1, Day2 or Night mode.
2. Enter the Destination Number – If the ring destination type is a
PDN or PhDN, enter the directory number. If the ring destination
type is Page, enter the Page Group number.
n1 = Up to 5 digits
507-08 Night Destination
)%
, n,
6SNU
, n1,
+ROG
,
+ROG
n = 1. None (default)
2. DN
3. Paging Group
1~4 (CTX100)
1~8 (CTX670 Basic)
1~16 (CTX670 Exp.)
1. Select Destination Type – Select the type of destination that
should ring when the door phone button is pressed during the
system Day1, Day2 or Night mode.
2. Enter the Destination Number – If the ring destination type is a
PDN or PhDN, enter the directory number. If the ring destination
type is Page, enter the Page Group number.
n1 = Up to 5 digits
Programs 500~577 (continued)
Button Sequence Value(s) Summary
To Next Page
Loading...
