Toshiba Strata CTX - Page 358

Telephone Button Programming
500 Series Programs
13-80 Strata CTX Programming - Part 3:Telephone Button Programming 04/03
517
Multiple Calling Group
Assignment
 , +ROG
This feature is available only with CTX Release 1.3 or higher software
and with CTX WinAdmin Release 1.3 or higher software.
517-00 Multiple Call Group
Number
n,
+ROG
n = 1~16 (CTX100),
1~32 (CTX670 Basic)
1~64 (CTX670 Exp.)
Select a group number.
517-01 MC Group Pilot
Number
)% , n, +ROG
n = 1~5 digits Enter the Pilot Directory Number that should be assigned to the
Multiple Call Group. This can be any number 1~5 digits that does not
conflict with numbers in the current system Number Plan.
517-02 Ring Delay 1 Timer
)% , n, +ROG
n = 1~180 Set the timer in seconds.
517-03 Ring Delay 2 Timer
)% , n, +ROG
n = 1~180 Set the timer in seconds.
517-04 System Call Forward
)% , n, +ROG
n = 0~32 Assign a System Call Forward template number to the multiple calling
group. Enter 0 or 1~32.
517-05 Voice Mail ID
)% , n, +ROG , +ROG
n = Up to 10 digits Enter the VM call forward ID digits for the multiple calling group
518
Multiple Calling
Members Assignment
 , +ROG
This feature is available only with CTX Release 1.3 or higher software
and with CTX WinAdmin Release 1.3 or higher software.
This program assigns members to a group.
518-01 Multiple Calling Group
Index
)% , n, +ROG
n = 1~16 (CTX100), 1~32
(CTX670 Basic) and 1~64
(CTX670 Exp.)
Enter a group number.
518-02 Member Index
Number
)% , n, +ROG
n = Up to 32 digits Enter the DN of the extension you wish to add.
518-03
Member Type
)% , n, +ROG
n = No Data
Dialing Digits
Enter Dialing Digits to make the extension ring.
518-04 Member DN
)% , n, +ROG
n = Up to 32 digits Enter the DN of the extension you wish to add.
518-05 Ringing Options
)% , n, +ROG , +ROG
n = Immediate
Delay 1
Delay 2
Select either: Immediate, Delay 1 or Delay 2.
520
LCR Local Route Plan
Assignment
 , +ROG
There are 64 LCR route plans. This assignment is used to select
which LCR route plan should be used to route local calls. The Local
Route Plan, which must be defined in the route definition assignment,
determines which CO line group is used for local outgoing calls.
520-01 Local Area Code
)% , n, +ROG
n = 3 digits Enter the area code for the dialing area in which the system is
installed. This is the area code for the Central Office (CO) that
provides local CO lines to the system. If no data is entered in this
field, any previously programmed data is lost.
520-02 Local Route Plan
)% , n, +ROG , +ROG
n = 1~64
(default = 1)
Enter the LCR Route Plan number that should be used to route local
calls. Local calls are made by dialing 7-digit public telephone numbers
that do not require an Area Code. There are 64 LCR Route Plans
from which to choose.
Programs 500~577 (continued)
Button Sequence Value(s) Summary