Toshiba Strata CTX - Page 366

Telephone Button Programming
500 Series Programs
13-88 Strata CTX Programming - Part 3:Telephone Button Programming 04/03
579-10 Central VM Callback
)% , n, +ROG
n = Up to 7 digits Enter the pilot DN for the centralized voice mail system. If this field is
left blank, the previously stored number will be deleted.
579-11 CFWD All Call Record
)% , n, +ROG
n = Up to 4 digits
(default = 91)
Enter DTMF VM-ID prefix string for calls arriving to voice mail via
“Call Fwd All Calls.
579-12 CFWD Busy Record
)% , n, +ROG
n = Up to 4 digits
(default = 91)
Enter DTMF VM-ID prefix string for calls arriving to voice mail via
“Call Fwd Busy.”
579-13 CFWD No Answer
Record
)% , n, +ROG
n = Up to 4 digits
(default = 91)
Enter DTMF VM-ID prefix string for calls arriving at the voice mail via
“Call Fwd No Answer.”
579-14 Direct Call
)% , n, +ROG
n = Up to 4 digits
(default = 91)
Enter DTMF VM-ID string for a call arriving at the voice mail as a
Direct Call.
579-15 Retrieve Messages
)% , n, +ROG
n = Up to 4 digits
(default = 91)
Enter DTMF VM-ID string for calls arriving at the voice mail to retrieve
messages.
579-16 Voice Main DN
)% , n, +ROG
n = Up to 7 digits
(default = 91)
Use a VM Pilot DN as a transfer destination.
579-17 Length of VM ID
)% , n, +ROG , +ROG
n = 1~10
(default = 91)
Select the number of characters in VM-ID string.
580
Voice Mail Port Data
 , +ROG
Assign characteristics of individual voice mail ports.
580-00 VM Port DN
n,
+ROG
n = Up to 5 digits Enter the DN of an individual VM port. For direct transfer to voice
mail, enter the remote Node ID and Pilot DN.
Note Do not enter a Pilot DN. This feature is available only with
CTX Release 1.3 or higher software and with CTX WinAdmin
Release 1.3 or higher software.
580-01 Control Method
)% , n, +ROG
n = 1. Inband/DTMF
2. SMDI
(default = no value)
Specify In-band or SMDI integration. Select SMDI for Remote voice
mail.
580-02 Send A/D Tone
)% , n, +ROG
n = 1. Enable (default)
2. Disable
Select whether Strata CTX sends A or D tone when a station
connecting to voice mail answers or disconnects.
580-03 Send B Tone
)% , n, +ROG
n = 1. B Tone
2. No Tone (default)
3. B Tone and Extension
Number
Enable Strata CTX to send B tones in the event of a Blind Transfer
Recall.
580-04 End-to-end
)% , n, +ROG , +ROG
n = 1. Enable (default)
2. Disable
Enable Strata CTX to send DTMF tones to voice mail in response to
key presses from a digital telephone.
Programs 579~580 (continued)
Button Sequence Value(s) Summary