Telephone Button Programming
600 Series Programs
Strata CTX Programming - Part 3:Telephone Button Programming 04/03 13-91
Telephone Button
Programming
657
Network COS
Mapping Table
Assignment
,
+ROG
This table translates a Network COS received as part of a Traveling
Class Mark to a local Class of Service for access to local services.
There is no translation of Outgoing Network COS.
Network COS
n,
+ROG
n = 1~32 Enter the Network COS to be translated (1~32).
657-01 Local COS
)%
, n,
+ROG
n = 1~32 Enter the Local COS to be used in place of the received Network
COS (1~32).
657-02 Off-hook Call
Announce
)%
, n,
+ROG
n = 1. Enable
2. Disable (default)
Choose whether an incoming call with this Network COS can activate
Off-Hook Call Announce.
657-03 System Speed Dial
)%
, n,
+ROG
Choose whether an incoming call with this Network COS can use a
System Speed Dial number to make an otherwise restricted outgoing
call.
657-04 COS Override
)%
, n,
+ROG
Choose whether an incoming call with this Network COS can use
Class of Service Override.
657-05 TGAC Override
)%
, n,
+ROG
,
+ROG
Choose whether an incoming call with this Network COS can override
local Trunk Group Access Control. Typically an attendant function.
658/
659/
660
Network DRL
Mapping Tables
,
+ROG
This command is used to establish two mapping tables to equate
local DRLs with network DRLs for both outbound and inbound
network calls.
Type
n,
+ROG
n = 1. Outbound
2. Inbound
Choose “Outbound” to equate the DRL of the local originator to a
Network DRL. Choose “Inbound” to equate a received Network DRL
with a local DRL for local termination.
Network DRL/FRL/
QPL
)%
, n,
+ROG
n = 1~16 Enter the local DRL/FRL/QPL you want to map to Network DRL/FRL/
QPL 1~DRL/FRL/QPL 16. This value can be different depending on
the type of table chosen above.
Programs 650~660 (continued)
Button Sequence Value(s) Summary
To Next Page
Loading...
