Software and Firmware Updates
IP Telephone/BIPU Firmware Update Procedures
Strata CTX Programming - Part 4: Appendices 04/03 E-9
Software and Firmware
Updates
9. From File Name box enter: DIPXXXX
10. Click Start and observe the update status: Getting Updated file\Updating\Finished
Updating\Resetting\idle.
Notes
• It could take 1 to 5 minutes to update the BIPU
• If an error occurs, recheck file names, locations etc. and try again.
11. Select Maintenance > Components > Cabinet. Enable the BIPU cabinet slot. This will also cause all IP
telephones that are connected to the disabled BIPU to be in the operational mode.
12. After the update is complete, select IP Telephone > IP Telephone Data. Select the IP telephone Prime
DN to check that the firmware version level has been updated properly.
➤ To check the IP telephone firmware version directly from an IP telephone
1. Simultaneously press the
+ROG buttons on the IP Telephone.
2. At the SELECT = prompt, press
then press +ROG
3. At the Select function key prompt, press )%, the IP telephone will be displayed.
4. To exit this mode, go off and on hook.
To Next Page
Loading...
