Installation
Step 4: Establish Communication with Strata CTX
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03 3-15
Installation
6. From the Connection Options Menu
(shown at right) enter the following:
• Community Name –
communityName (entry is case
sensitive). This is the default
community name for CTX
systems.
• CTX IP/Name – 192.168.254.253
(NIC). This is the default IP
Address of the CTX that is set in
CTX Program 916.
• IP Address – 192.168.255.254
This is the CTX built-in modem
fixed IP address for
Dial-up connections. It cannot be
changed.
Notes
● If you are connecting to Strata CTX using your modem, click in the Use Dial-Up box and enter the
phone number to connect to your Strata CTX. The CTX IP address in the CTX IP Name field
automatically defaults to the Strata CTX modem’s static IP address.
● If you have set up the Profile User Management screen with CTX site information, click on the CTX
Host name and IP address of the CTX listed in the box at the bottom of the screen.
● Adding and Saving a new CTX connection can be done by clicking Profile > User Management. For
details see “User Management” on page 3-16.
7. Click on Connect Now.
Important! If you are not able to connect after clicking on the Connect Now button, then
re-check the set up steps described in this chapter.
To Next Page
Loading...
