10 • Overview User Guide Ver. 7.1.0 2100 Cap Inspector
About This Manual
For convenience, this manual is divided into a number of
chapters. A brief description of each chapter follows.
Chapter 1: Unpacking and Inspection
This chapter is a guide to insure that the Cap Inspector is
received in proper condition and that all the necessary
components have been located.
Chapter 2: System Power Up
This chapter contains the required information for
electrically connecting the system components and then
powering up the system.
Chapter 3: System Check
This chapter contains a step-by-step procedure to help the
user become familiar with the basic operation of the Model
2101C Cap Inspector by performing a system check.
Chapter 4: Modes of Operation
This chapter describes the functionality of the Run Mode
and the Program Mode as well as how to limit access to the
program mode with a password.
Chapter 5: Profile Manager
This chapter contains a description of the programming
features that can be used to create a profile for a specific test
type and the menus that are used in the process.
Chapter 6: Test Types
This chapter contains a description of the test types that can
be selected.
To Next Page
Loading...