Vibrac 2100 - Creating an Incremental Test; Whats Inside; Select Test Type; Keyboard for the Incremental Test

40 • Creating an Incremental Test User Guide Ver. 7.1.0 2100 Cap Inspector
Creating an Incremental Test
What's Inside
This chapter contains a step-by-step procedure for creating
an Incremental Torque Test.
Select Test Type
On the Select Test Type screen select Removal
and Incremental
The software will advance to the Enter Profile
Name screen as shown below.
Keyboard for the Incremental Test
For this manual the profile name, Removal &
Incremental has been entered.
Selecting OK will advance the software to the
Removal and Incremental Test Setup Screen
shown below.