12 • Overview User Guide Ver. 7.1.0 2100 Cap Inspector
Chapter 15: Viewing and Saving Test Results
This chapter contains a description of the procedure for
saving test results and then viewing and printing these
results.
Chapter 16: Modifying Test Reports
This chapter contains a description of the procedure for
modifying reports to fit the application.
Chapter 17: Transmitting Test Results
This chapter provides a description of the output port,
requirements, communication protocol and procedure for
transmitting test results automatically.
Chapter 18: Using The USB Features
This chapter describes in detail the use of a USB drive to
backup the system and to restore profiles.
Chapter 19: Gold Standard Verification
This chapter describes the calibration verification of the Cap
Inspector with a Vibrac Gold Standard.
Chapter 20: Cap Inspector Calibration
This chapter describes the entire calibration process, from
the initial verification through the performance of a user
calibration.
Chapter 21: Setting the Date and Time
This chapter contains a description of the procedure for
setting the Date and Time.
Chapter 22: Down Force Option
This chapter describes the down force mechanism that is
used for testing Child Resistant caps.
To Next Page
Loading...