User Guide Ver. 7.1.0 2100 Cap Inspector Gold Standard Verification • 93
Gold Standard Verification
What's Inside
This chapter describes the calibration verification of the Cap
Inspector with a Vibrac Gold Standard.
Vibrac Gold Standard Description
The Model C-2112 Gold Standard Verification Tool is used
to quickly verify the calibration and operational repeatability
of both the 2000 and 2100 Series Cap Inspectors. These
devices are pre-set to a torque value that matches the
requirements of the customer.
Calibration Verification with the Gold Standard
The following step-by-step procedure will guide the user
through this process.
To Next Page
Loading...