Vibrac 2100 - Creating a Strip Torque Test; Whats Inside; Select Test Type; Keyboard For Strip Torque Test

56 • Creating a Strip Torque Test User Guide Ver. 7.1.0 2100 Cap Inspector
Creating a Strip Torque Test
What's Inside
This chapter contains a step-by-step procedure for creating a
Strip Torque Test.
Select Test Type
On the Select Test Type screen select Strip.
The software will advance to the Enter Profile
Name screen as shown below.
Keyboard For Strip Torque Test
For this manual the profile name, Strip has
been entered.
Selecting OK will advance the software to the
Strip Test Setup Screen shown below.