User Guide Ver. 7.1.0 2100 Cap Inspector Creating an Incremental Test • 43
Close Options
This is the torque value that will be used when the Close
Button is pressed in the Incremental Test Mode.
The Close Option is seldom used in the Incremental Test
Mode.
Application Torque
Observe the minimum and maximum
values.
To input a value, just start typing. The first key
selected will overwrite the first highlighted
value on the screen. When the desired value
has been keyed in press OK to save the new
value.
Removal & Incremental Test Run Screen
When the Removal & Incremental test has been
programmed and selected the run screen, shown below, will
be displayed
To Next Page
Loading...