80 • Quick Start User Guide Ver. 7.1.0 2100 Cap Inspector
Performing the Test
The run screen is now displayed.
The name of the selected profile appears at the
bottom of this screen and the Test Type
appears in the center of the screen just beneath
the Live Torque display.
Now with the live torque reading Zero, we can position the
sample to be tested in the bottle holding tooling.
Once the bottle has been secured, the drive chuck can be
placed on the cap of the sample to be tested.
Pressing the Open button will start the test.
Live Run Test Screen
This screen is displayed as the test is being
performed.
The Stop Button, when pressed, will
immediately stop the drive and terminate the
test.
To Next Page
Loading...