User Guide Ver. 7.1.0 2100 Cap Inspector Profile Manager • 29
Select Button
This button will advance the software to the Test Profile
Library that is displayed on power up.
Edit Button
This button will advance the software to the Test setup
screen for the currently selected test Profile.
New Button
This button will advance the software to the select test type
menu for creating a new profile.
Delete Button
This button will delete the currently selected Profile.
Save to USB
This button enables the user to make a copy of the currently
displayed Profile on a memory stick
Print
This button will send the profile data in serial form to the
RS232 port.
To Next Page
Loading...