Vibrac 2100 - Creating an ROPP CAP Test; Whats Inside; Select Test Type; Keyboard for ROPP Torque Test

User Guide Ver. 7.1.0 2100 Cap Inspector Creating an ROPP CAP Test • 61
Creating an ROPP CAP Test
What's Inside
This chapter contains a step-by-step procedure for creating
an ROPP Cap Torque Test.
Select Test Type
On the Select Test Type screen select ROPP.
The software will advance to the Enter Profile
Name screen as shown below.
Keyboard for ROPP Torque Test
For this manual the profile name, ROPP has
been entered.
Selecting OK will advance the software to the
ROPP Test Setup Screen shown below.