38 • Creating a Removal Torque Test User Guide Ver. 7.1.0 2100 Cap Inspector
Application Slow Down At
Observe the minimum and maximum
values.
To input a value, just start typing. The first key
selected will overwrite the first highlighted
value on the screen. When the desired value
has been keyed in press OK to save the new
value.
Multi-Test Options
When Multi is enabled the following screen will be
displayed.
Multi-Test Run Options
This menu enables the user to perform a
number of tests with a nap between tests to
prevent over heating the threads.
It is frequently used for life testing a closure.
Report Options
The Header and Comment Button will display the
following menu.
To Next Page
Loading...