Vibrac 2100 - Communication Protocol; Data Format Information

User Guide Ver. 7.1.0 2100 Cap Inspector Transmitting Test Results • 87
Pin Out
02 = XMIT
03 = RCV
05 = GND
Communication Protocol
Data is transmitted in normal ASCII format with the
following specifications.
Baud Rate: 9600
Data Bits 8
Stop Bits 1
Parity: No
Xon / Xoff Yes
Data Format Information
When transmitting test results the following data strings are
used for the different test modes.
Removal Torque
Date_Time_Units_Torque_Test Type_<CR><LF>
Example:
01/01/00_09:00_lb-in_10.80_removal_<CR><LF>