User Guide Ver. 7.1.0 2100 Cap Inspector Transmitting Test Results • 89
Transmitting Data Automatically
The Cap Inspector can be programmed to automatically
transmit test results at the end of a test or live data during the
testing process.
Transmitting End of Test Results Automatically
Pressing the Auto Transmit Key on Page 1 of the System
Options Menu will display the Data Output to PC menu
shown below.
Only one of the two menu items can be
enabled at a time.
The single line of data is provided for
outputting to commercially available SPC
programs.
The Chart-It selection is used to output data to
Vibrac's comprehensive data analysis program.
To Next Page
Loading...