Vibrac 2100 - Incremental Pass; Fail Limits

42 • Creating an Incremental Test User Guide Ver. 7.1.0 2100 Cap Inspector
Removal Peak Detect
Observe the minimum and maximum
values.
To input a value, just start typing. The first key
selected will overwrite the first highlighted
value on the screen. When the desired value
has been keyed in press OK to save the new
value.
Removal Pass / Fail Limits
Low Limit: The Torque value that must be exceeded for the
test to pass.
High Limit: The torque value that must not be exceeded for
the test to pass.
Report Options
The Header and Comment will be displayed on all test
reports for this test profile.
Incremental Pass / Fail Limits
Low Limit: The Torque value that must be exceeded for the
test to pass.
High Limit: The torque value that must not be exceeded for
the test to pass.