Yamaha F150B - Page 443

i-3
Index
0
1
2
3
5
6
7
8
9
10
10
A
D.
Dimension and Weight................................1-3
Dimensions .................................................3-2
Disassembling the cylinder block..............7-53
Disassembling the drive shaft
housing ..........................................8-16, 8-61
Disassembling the forward gear ...............8-16
Disassembling the fuel pump....................6-10
Disassembling the gear pump
assembly.................................................9-47
Disassembling the lower case .........8-16, 8-61
Disassembling the oil pan and exhaust
manifold ..................................................9-21
Disassembling the oil pump assembly......7-48
Disassembling the propeller shaft
assembly.................................................8-10
Disassembling the propeller shaft housing
assembly........................................8-11, 8-55
Disassembling the PTT motor...................9-41
Disassembling the reverse gear ...............8-61
Disassembling the shift bracket ..................9-3
Disassembling the starter motor ...............5-43
Disassembling the tilt ram.........................9-52
Disassembling the upper case..................9-17
Disassembling the vapor separator ..........6-32
Disassembling the water pump
housing ............................................8-6, 8-52
Disassembly and assembly ........................0-3
Draining the fuel........................................6-32
Drive shaft and lower case (counter rotation
model) .....................................................8-59
Drive shaft and lower case (regular rotation
model) .....................................................8-14
E.
ECM coupler layout...................................5-12
Electric shock..............................................0-1
Electrical components.................................5-1
Electrical technical data ..............................1-6
Electronic control system ............................2-1
Electronic fuel injection control system .......2-5
Engine control units and components.......5-14
Engine ECM component .............................2-2
Engine speed control system.............1-8, 2-13
Exhaust cover ...........................................7-32
Extension length recommendation of battery
cable .......................................................3-25
Exterior........................................................3-2
F.
Fail-safe control ........................................2-17
Feature........................................................4-1
Flywheel magnet ........................................ 7-5
Forward gear shim (T1) selection chart.... 8-41
Forward gear shim (T2) selection chart.... 8-78
Fuel and oil requirement............................. 1-4
Fuel control units and components........... 5-23
Fuel filter................................................... 6-13
Fuel hose and blowby hose........................ 6-1
Fuel injection control system ...................... 1-7
Fuel injector .............................................. 6-25
Fuel line ...................................................... 6-4
Fuel pump................................................... 6-8
Fuel system ..................................... 1-11, 1-18
Fuel system technical data ....................... 1-11
Function...................................................... 4-2
Fuse box................................................... 7-14
G.
Gauge / sensor ......................................... 1-10
General feature........................................... 1-1
General Periodic Maintenance ................. 10-9
General tightening torque ......................... 1-21
H.
Handling of burner ...................................... 0-2
Handling of gasoline ................................... 0-1
Handling of sealant..................................... 0-2
Hardware requirement................................ 4-1
Hose routing ............................................... 6-1
Hot part....................................................... 0-1
How to use this manual .............................. 0-4
I.
Idle exhaust system.................................. 2-28
Idle speed control ..................................... 2-16
Ignition timing control system ............ 1-6, 2-10
Ignition units and components.................. 5-28
Install the speed sensor (option for 6Y8
Multifunction Meter) ................................ 3-12
Installing the 6Y8 Multifunction Meter harness
(option) ................................................... 3-12
Installing the anode (cylinder block) ......... 7-51
Installing the battery ................................. 3-17
Installing the canister.................................. 6-7
Installing the clamp bracket ...................... 9-29
Installing the cowling lock lever .................. 9-9
Installing the crankcase cover .................. 7-50
Installing the cylinder head ....................... 7-44
Installing the drive shaft................... 8-20, 8-63
Installing the exhaust cover ...................... 7-34
Installing the flushing hose ......................... 9-9
Installing the flywheel magnet .................... 7-6
Installing the fuel flow sensor ................... 3-16