Yamaha F15A - Flywheel Magneto Removal; Service Points

E
FLYWHEEL MAGNETO (EH/E MODELS)
POWR
SERVICE POINTS
Flywheel magneto removal
1. Remove:
9 Flywheel magneto
A For USA and CANADA
B Except for USA and CANADA
cC
The major load should be applied in the
direction of the arrows. If the load is not
applied as shown, the flywheel holder
may easily slip off.
2. Remove:
9 Flywheel magneto
A For USA and CANADA
B Except for USA and CANADA
cC
9 Keep the nut side flush with the crank-
shaft end until the flywheel magneto
comes off the tapered portion of the
crankcase.
9 To prevent damage to the engine or
tools, screw in the universal-puller set
bolts evenly and completely so that the
universal puller plate is parallel to the fly-
wheel magneto.
5-9
Flywheel holder:
YB-06139/90890-06522
Universal puller:
YB-06117/90890-06521
A
B
A
B