YAMAZAKI MAZAK VORTEX i Series User Manual

MACHINE INFORMATION 2
2-5
2-1-2 Outline of the machine structure
This section indicates outline of the machine structure.
1. INTEGREX i/e-H/i-V/e-V
:Applicable, -: Not applicable
Number of
simultaneously
controlled axes
Kind of machining
Structure
Axis direction during
home return
4/5 axis (Note)
Multi-tasking machine

Spindle No. 1
-Z
-
Spindle No. 2

upper turret
-
lower turret
Note: It is 5 axis when there is option of simultaneously controlled 5 axes, it is 4 axis when
there is not.
2. INTEGREX i-S/e-H-S
:Applicable, -: Not applicable
Number of
simultaneously
controlled axes
Kind of machining
Structure
Axis direction during
home return
4/5 axis (Note)
Multi-tasking machine

Spindle No. 1
-Z

Spindle No. 2

upper turret
-
lower turret
Note: It is 5 axis when there is option of simultaneously controlled 5 axes, it is 4 axis when
there is not.
3. INTEGREX i-ST/e-H-ST
:Applicable, -: Not applicable
Number of
simultaneously
controlled axes
Kind of machining
Structure
Axis direction during
home return
4/5 axis (Note)
Multi-tasking machine

Spindle No. 1
-Z

Spindle No. 2

upper turret

lower turret
Note: It is 5 axis when there is option of simultaneously controlled 5 axes, it is 4 axis when
there is not.
4. VORTEX i-V
:Applicable, -: Not applicable
Number of
simultaneously
controlled axes
Kind of machining
Structure
Axis direction during
home return
4/5 axis (Note)
Vertical machining center
-
Turning spindle
-Z

Mill Spindle
Note : It is 5 axis when there is option of simultaneously controlled 5 axes, it is 4 axis when
there is not.
Serial No. 294060
Copyright (c) 2013 YAMAZAKI MAZAK CORPORATION. All rights reserved.
Serial No. 294060

YAMAZAKI MAZAK VORTEX i Series Specifications

General

Brand	YAMAZAKI MAZAK
Model	VORTEX i Series
Category	Computer Hardware
Language	English