YAMAZAKI MAZAK VORTEX i Series User Manual

MACHINING PROGRAM 4
4-73
3. Dual workpiece machining
This section explains how to make dual workpiece machining.
Dual workpiece machining pattern is shown in the following.
<Dual workpiece>
Parallel machining (on both spindle sides with each turret)
: Possible —: Inapplicable
EIA/ISO
Upper turret
1st spindle
2nd spindle
Turning
Milling
Turning
Milling
Lower
turret
1st
spindle
Turning
—
—


Milling
—
—
 (Note)
 (Note)
2nd
spindle
Turning
 (Note)
 (Note)
—
—
Milling


—
—
Note : Sample programs are shown in this manual.
Upper turret & HD1
Lower turret & HD2
Dual workpiece machining
Upper turret & HD2
Lower turret & HD1
Serial No. 294060
Copyright (c) 2013 YAMAZAKI MAZAK CORPORATION. All rights reserved.
Serial No. 294060

YAMAZAKI MAZAK VORTEX i Series Specifications

General

Brand	YAMAZAKI MAZAK
Model	VORTEX i Series
Category	Computer Hardware
Language	English