YAMAZAKI MAZAK VORTEX i Series User Manual

SUPPLEMENT 5
5-65
I. Pressing
1. Command
Programming format
M508
Pressing setup
M509
End of pressing
Function
Makes a pressing function effective for delivery of the workpiece from the turning spindle
No. 1 to No. 2, or vice versa.
J. Turning spindle synchronized rotation
1. Command
Programming format
M511
Turning spindle synchronized rotation
(master: turning spindle No. 1, slave: turning spindle No. 2)
M512
Turning spindle synchronized rotation
(master: turning spindle No. 2, slave: turning spindle No. 1)
M513
Turning spindle synchronized rotation OFF
Function
This function code enables synchronized rotation of two opposite turning spindles.
(M511/M512)
This function code deactivates M511 and M512. (M513)
K. Transfer mode
1. Command
Programming format
M540
Transfer mode ON
M541
Transfer mode OFF
Function
This function code makes the workpiece transfer mode (from turning spindle No. 1 to
turning spindle No. 2 or vice versa) valid. (M540)
This function code makes the workpiece transfer mode (from turning spindle No. 1 to
turning spindle No. 2 or vice versa) invalid. (M541)
Serial No. 294060
Copyright (c) 2013 YAMAZAKI MAZAK CORPORATION. All rights reserved.
Serial No. 294060

YAMAZAKI MAZAK VORTEX i Series Specifications

General

Brand	YAMAZAKI MAZAK
Model	VORTEX i Series
Category	Computer Hardware
Language	English