Ascotel IntelliGate 2025/2045/2065
Part 9 Glossary 1003
L
M
N
Least Cost Routing (LCR) Routing function used to determine the network operators via
which a call is to be routed. Usually the most cost-effective
route is selected.
Licence Code (LIC) Licence code: Part of the → licensing information
Licence information Regulates the activation of licensed attributes. Consists of the
→ Licence Code and the → EID, and is stored on the →EIM
card.
Light Emitting Diode (LED) Light emitting diode: light source used for signalling purposes
Line key Key on a → key telephone that is allocated to a KT line or on
→ Operator Console (previously: aggregate key).
Liquid Crystal Display (LCD) Liquid crystal display
Local Area Network (LAN) Computer network for geographically limited region.
Long distance code → National destination code
Multiple Subscriber Number (MSN) Allocates several call numbers to one ISDN basic access (mul-
tiple subscriber number).
National Destination Code (NDC) Code used for identifying national networks, the long-dis-
tance code
Network → Private or → public network
Network interface Network-side PBX interfaces
Network Terminator Network termination
Node Branch point or end point in a communication network. The
nodes of a → PISN are the → PINXs.
Numbering Plan Identifier (NPI) 1. Numbering plan type:
In the public network, the numbering plan identifier used
is → E.164.
In the private network, the numbering plan identifier used
is → PNP.
2. Configuration parameter used for specifying the number-
ing plan identifier. Parameter values: E.164 / PNP /
unknown.
To Next Page
Loading...
