Aastra Ascotel IntelliGate 2065 - 8.3.3 Enquiry call with return to the initial call

Ascotel IntelliGate 2025/2045/2065
Part 2 Features 461
System configuration
Tab. 2.158: Hold (enquiry call): System configuration
Reference to Other Features
8.3.3 Enquiry call with return to the initial call
A subscriber (B) can initiate an inquiry call connection during a call (A – B) and as
a result hold a short conversation with another call partner (C), without interrupt-
ing the first connection. The original connection is restored once the enquiry call
is completed.
Fig. 2.174: Enquiry call
Detailed Description
Tab. 2.159: Enquiry call with return to initial call
Parameter Parameter value Remarks
Hold in the exchange Yes / No • In the group configuration.
• Local feature does not require a setting
Music on hold None / External / Internal /
Hold tone
Throughout the system
Features:
• "Brokering (switching back and forth between two calls)", page 462
• "Enquiry call with return to the initial call", page 461
• "Three-party conference from an enquiry call", page 464
• "Call transfer (switching)", page 467"
• "Recall", page 472
• "Call acceptance", page 474
Interface Operating sequence / signalling on the terminal Scope
A "Music on hold" is played to subscriber A, who
is on hold
1)
1)
With hold in the public exchange, the signalling depends on the network provider.
Possible interfaces:
internal, external, PISN
C Possible interfaces:
internal, external, PISN
A B
C
haz0619aaxxa0