Ascotel IntelliGate 2025/2045/2065
Part 1 Ascotel Information Management System (AIMS) 155
10.5.2 Working online (PBX database)
Data in the PBX database can only be accessed in the online mode. The following
functions are available:
Connect
Connects the PBX with the AIMS Shell. The function uses the date and time to
determine whether the PBX data matches the data stored in the AIMS database.
If the data does not match, all the PBX data will automatically be downloaded into
the AIMS database.
Disconnect
Closes all the AIMS Managers and disconnects the online connection between the
PC and the PBX.
If data was modified, the system will ask whether you want to save the changes
in the AIMS database.
Save
Saves the modified data in the PBX. The system will then ask you whether you
want to update the AIMS database.
Download
During a download via the AIMS Shell all the PBX data is loaded from the PBX to
the AIMS database.
During the download the PBX is automatically prebarred and then automatically
released once the operation is completed. Existing connections are retained. The
progress of the download operation is indicated by a progress indicator bar in a
window. A download can be carried out when the system is operating under full-
load conditions.
Download view
The View Download function loads the PBX data of the current window in an
AIMS Manager from the PBX into the PC's main memory. This partial download
is available in the "Online mode" in the online mode of individual Managers (e.g.
Configuration Manager, Fault & Maintenance Manager). "Download View" is
used to register new or modified hardware in AIMS.
To Next Page
Loading...
