Ascotel IntelliGate 2025/2045/2065
Part 2 Features 445
Detailed Description
Tab. 2.134: Follow me
The call forwarding from B to C remains active until subscriber B cancels Follow
me on his own terminal.
The functions configured on the subscriber’s own terminal (e.g. exchange access)
are not transferred to the destination terminal.
A call forwarding already activated will be overwritten by Follow me.
Follow me will interrupt any Call Forwarding Unconditional chains.
Prefix Dialling Procedures
Tab. 2.135: Follow me: Procedures
System configuration
Tab. 2.136: Follow me: System configuration
Reference to Other Features
8.2.3 Call Forwarding on No Reply (CFNR)
Unlike Call Forwarding Unconditional, the call to subscriber B’s telephone set is
initially signalled in the normal way when CFNR is activated. If the called party B
does not answer the call after (0), 3, 5 or 7 ringing cycles, the call will also be sig-
nalled (in parallel) on the terminal of subscriber C, who has been forwarded.
Interface Operating sequence / signalling on the terminal Scope
C Once the feature has been activated, the sub-
scriber obtains an acknowledgement tone.
Possible interfaces:
Internal
*/# procedure
Activate Follow me on the destination set *23 SC No. B
Clear Follow me on the subscriber’s own terminal #23
Parameter Parameter value Remarks
No settings
Features:
• "Call Forwarding Unconditional (CFU)", page 438
To Next Page
Loading...
