Aastra Ascotel IntelliGate 2065 - 8.1.6 Subscriber-related authorizations

Ascotel IntelliGate 2025/2045/2065
432 Features Part 2
Features That Set up a Call Connection
The following subscriber-related features are supported by the PBX and can be
activated via the keypad, the function key or the Foxkey:
Tab. 2.128: QSIG features with call connection
Features That Can Be Activated/Deactivated
All remote-controlled subscriber-related features listed in Tab. 2.298 are sup-
ported by the PBX and can be activated or reset via the keypad or function key.
The only requirement is that remote control authorisation has been enabled for
the PISN subscriber concerned, and that *06 is not barred in the internal digit bar-
ring for the subscriber executing the feature.
Example: Clearing CFU of a PISN subscriber: *06 <PISN SC No.> #21
System configuration
Due to the proprietary protocol attempts at operating a subscriber-related feature
of an older or third-party PINX via QSIG can lead to incorrect interpretations. That
is why the protocol extension can be inhibited in the trunk group configuration
using the parameter "QSIG extension = No" (initialisation setting = No).
8.1.6 Subscriber-related authorizations
A class-of-service authorization in the subscriber configuration is required in order
to run the following subscriber-related features.
• Activate call waiting
• Activate intrusion
• Set up announcement
• Activate MESSAGE (*38)
• Remote control
• Access to hotel functions
• Access to the system configuration (System Assistant authorization only)
Feature Activate
Fetch call *86 PISN SC No.
Answer PSA *82 PISN Pager No.