Ascotel IntelliGate 2025/2045/2065
890 Data Maintenance Part 7
Terminal configuration data can be modified either using AIMS or directly from
the system terminal.
2.1.4 System-specific data
The system-specific data (system ID, system type, sales channel, licensing, DECT
identification numbers) is stored on the EIM card (chip card).
2.2 Updating system software and terminal software
The PBX's system software is loaded using the AIMS Upload Manager
(software upload).
The PBX's system software also contains the software for the Office 45 system ter-
minals, the DECT radio units and the Office 135 and Office 155pro handsets.
There are several possibilities for establishing a communication link between the
PBX and the AIMS Upload Manager (see "PBX connection", page 891).
The type of access to the PBX is also determined by the type of upload. A standard
upload replaces an already functional system software (see "Standard upload",
page 892).
An Emergency Upload has to be initiated if the PBX does not have a functional
system software (see "Emergency Upload of the system software", page 896).
2.2.1 AIMS Upload Manager
The Upload Manager called up via the AIMS Shell is a convenient and reliable way
of loading a new system software on to the PBX.
All the information and settings required for the software upload are accessible
via the main menu of the AIMS Upload Manager, namely "PBX Remote Upload".
The top left-hand portion of the screen contains pull-down menus and a toolbar.
They contain all the main standard functions.
Context-sensitive help information is available in many of the menus.
To Next Page
Loading...
