Ascotel IntelliGate 2025/2045/2065
Part 7 Hardware updates and system expansion 901
3 Hardware updates and system expansion
Here is described how licenses are adapted, how cards and terminals are replaced,
expanded and removed, and how a defective mainboard is replaced.
3.1 Licenses and EIM cards
License information and the IP address of the PBX are stored on the EIM card. This
chapter describes how licenses are adapted as well as when and how an EIM card
is replaced.
3.1.1 Licences
This available licenses are described in Part 3 under "System expansion". The fol-
lowing chapter describes how licenses are adapted.
3.1.1.1 Adapting licences
To expand a system already in operation or to re-order a licence for a new system
(see "Licence-related System and Expansion Limits", page 593), proceed as fol-
lows:
1. Order the licence package you want from your authorized dealer. Also
Specify the system's licence information (EID, old licence code, system type).
Your dealer will then send you a new licence code.
2. Overwrite the old licence code with the new code (see "Activating the
licences", page 854). The new licence code is stored in the EIM.
3. Upload the system configuration data and restart the system; the licensed
function(s) is (are) now enabled.
3.1.2 EIM card
If the EIM card has to be replaced if:
• A licence is transferred to another system of the same type
• The mainboard is defective
• The EIM card is defective