Aastra Ascotel IntelliGate 2065 - 5.4.7 LCR with Key Telephones; 5.4.8 LCR in the private Leased-line Network; 5.4.9 Call logging and Data Protection

Ascotel IntelliGate 2025/2045/2065
318 Call Routing Part 2
Tab. 2.54: Call routing to an indirectly connected network provider
5.4.7 LCR with Key Telephones
LCR routing when dialling via the line keys depends on the "Force route" author-
ization.
• "Force route" enabled:
Routing is effected via the KT route as with a deactivated LCR function.
• "Force route" not enabled
Routing is effected via the LCR function.
5.4.8 LCR in the private Leased-line Network
Where the LCR function is concerned, a private leased-line network (PISN) is a spe-
cial network provider, characterized as follows:
• A PISN is usually reached directly (see "Direct Network Access", page 304).
• Digit sequences of PISN-internal phone numbers must be entered with the I-
prefix in the LCR table (see "External and PISN-Internal Entries (E and I Prefix)",
page 309).
• Overflow routing from the PISN to the public network is implemented with the
LCR function by entering the PISN as the primary network provider and the
public network provider as the alternative network provider. Unlike fallback
routing, routing to the alternative network provider does not generate an
event message (see also "Alternative Routing (Fallback Routing)", page 313).
5.4.9 Call logging and Data Protection
In connection with the LCR function, the OCL output format PC5 (recommended)
or PC4 must be used (see "Output formats", page 385).
Force network provider is enabled
No yes
User dials network provider number or
code
LCR routing Routing as per user's choice