Ascotel IntelliGate 2025/2045/2065
Part 2 Features 495
Reference to Other Features
8.4.12 Message function
A MESSAGE can be sent from any terminal to all system terminals. Depending on
the terminal the receipt of a MESSAGE is signalled by a callback request.
Fig. 2.195: Activate MESSAGE
Detailed Description
Tab. 2.214: Activate MESSAGE
Number of callback requests:
The number of callback requests that can be stored for each user-network inter-
face depends on the terminal.
Display priority:
External alarm messages have maximum priority. Callback requests are displayed
with a higher priority than Voice Mail notifications and text messages.
Tip:
With the Message function a subscriber has the possibility of activating
several callbacks simultaneously, depending on his terminal.
Features:
• "Leave message", page 496
• "Standard texts", page 498
• "Ascotel Voice Mail", page 479
• "Operation with external messaging, monitoring and alarm systems", page 556
Interface Operating sequence / signalling on the terminal Scope
A Once the procedure has been executed, A obtains the
acknowledgement tone.
Requirement:
The activating subscriber A must be
authorized to use this function.
B • Office terminals with display:
– Text messages
– Attention ringing tone
– LED display (Office 25, Office 35, Office 45 only)
• Office 20: "MESSAGE" appears on the display
• Office 10: LED display is lit
Possible interfaces:
Internal
Requirement:
Office terminal
A
B
haz0603aaena0
"MESSAGE"
To Next Page
Loading...
