Ascotel IntelliGate 2025/2045/2065
338 Call Routing Part 2
5.6.2 From the private leased-line network into the public
network
A PINX will route an incoming call from the private leased-line network on
towards the public network if the incoming call has a phone number
• with NPI = E.164 or
• with an exchange access prefix.
Phone number with NPI = E.164
If the numbering plan identifier of an incoming call’s phone number corresponds
to type E.164, the call will be routed directly to the route set under "Transit route"
by the incoming trunk group at a gateway or transit PINX.
The numbering plan identifier is set under "NPI" in the route configuration of the
source PINX.
Route 2:
• Trunk groups 2 (reference number of one or more trunk group(s))
• Digit barring Use or do not use digit barring
• Outgoing connections Number of connections allowed simultaneously
• Numbering plan identifier NPI PNP
• Type of number TON Unknown
Trunk group 2:
• Network interfaces Network interfaces of this trunk group
• Network type Private
• Protocol QSIG or QSIG / PSS1 ISO
Parameter Parameter value