Aastra Ascotel IntelliGate 2065 - 8.5.6 Suppression of the call number display for each call

Ascotel IntelliGate 2025/2045/2065
530 Features Part 2
Detailed Description
Tab. 2.270: Emergency number
The emergency number destination depends on the status of switching group 1.
Note:
If an external destination with exchange access prefix code is specified,
it is important to ensure that a route is assigned to each subscriber.
System configuration
Tab. 2.271: Emergency number: System configuration
Note:
The emergency number can also be the destination of a hotline and can
be configured differently for each of the three possible switch positions.
Example: Hotline on lift telephone
Switch position 1 (day): 11, switch position 2 (night): 175 and switch position 3
(weekend): 0118.
8.5.6 Suppression of the call number display for each call
Besides the possibility of using the System Configuration to permanently suppress
the display of a particular subscriber's number on the called party's terminal
(CLIR), the function can also be activated for one call only.
Detailed Description
The procedure *31 prior to dialling an external call number ensures that the CLIP
is not displayed to the called party. CLIR per call is supported only for external calls
via digital network interfaces with the DSS1 protocol. CLIR per call is automatically
deactivated again once the call is completed.
Interface Scope
B Possible interfaces:
internal, external, PISN
Parameter Parameter value Remarks
Emergency number <Call number> Numbering Plan
Emergency number Destination <call No.> for switch position <1 to 3>