Ascotel IntelliGate 2025/2045/2065
248 Routing elements Part 2
is activated, the route is determined by the LCR unless the subscrib is authorized
to force the route
When a PISN subscriber number is dialled, the route used is the one entered in the
subscriber configuration for that PISN subscriber. If the LCR function is activated,
the route will be determined by LCR.
Subjects Relating to Subscriber Configuration:
User-network interfaces, Call distribution, Route, User group, Operator
Consoles, key telephones, Internal traffic, Incoming traffic, Outgoing
traffic, Traffic in the PISN, Subscriber-related features, Numbering plan.
4.8 Operator Console
The system has one switching station, which is defined under the name "Operator
Console" in the internal numbering plan. Several Operator Consoles can be oper-
ated on the same PBX. There are two types of Operator Consoles:
• The PC Operator Office 1550 is a PC terminal connected to the S user-network
interface via the relevant Terminal Adapter.
• The system terminal Office 45 as an Operator Console connected to the AD2
interface.
With the exception of type-specific characteristics the following explanations
apply to both types of Operator Console. Details and properties can be found in
the type-specific documentation.
4.8.1 Routing Functions for Incoming Calls
Routing an Outside Call
Incoming calls are routed to the Operator Console(s) either directly or via a user
group a call distribution element.
On an Office 45, Operator Console the calls are provided on the line keys. If all
the line keys are busy, other calls will be sorted into the call queue.
On an Office 1550, the calls are entered in the external call queue. To answer the
call the operator selects it directly from the call queue displayed on the graphic
interface.
To Next Page
Loading...
