Ascotel IntelliGate 2025/2045/2065
918 Operations supervision Part 7
4.1.3 Signal destinations
4 signal destinations can be configured in the Fault & Maintenance Manager. Any
one of the four event tables can be assigned to each signal destination.
When the PBX is first started, one event table with its own number is assigned to
each signal destination.
Signal destinations include:
• Terminal (system terminals of the Office family, with alphanumeric display)
• External signal destination (signal destination PC (SEM) via ISDN or LAN / WAN
to T interface)
• Local signal destination (e.g. PC (SEM) / printer on V.24 interface, PC (SEM) on
S interface / Ethernet interface)
• Event log (event protocols in the Fault & Maintenance Manager)
To Next Page
Loading...
