Aastra Ascotel IntelliGate 2065 - 8.5.11 Controlling relays

Ascotel IntelliGate 2025/2045/2065
Part 2 Features 537
Detailed Description
Tab. 2.284: Searching via a paging system
The paging system can also serve as the destination for a Call Forwarding Uncon-
ditional.
Procedures
Tab. 2.285: Searching via a paging system: Prefix Dialling Procedures
Tab. 2.286: Searching via a paging system: Suffix dialling procedure
System configuration
Tab. 2.287: Searching via a paging system: System configuration
8.5.11 Controlling relays
Various equipment or installations can be controlled using relays either on the sys-
tem or on special card OI-2DOOR. The telephone can be used to operate sun
blinds, for example, or to switch the lighting on or off throughout the building.
Interface Operating sequence / signalling on the terminal Scope
A • A obtains the ring-back tone of the paging
system.
• A obtains the busy tone if the paging system
is busy or not available.
Possible interfaces:
• The function is activated locally on the
system.
B Possible interfaces:
• Internal
*/# procedure
Activate search via PS *81 destination No.
Activate CFU to PS *28
Clear CFU to PS #28
Answer PSA *82 destination No.
*/# procedure System Terminals a/b terminal
Activate search via PS *81 R8 or R*81 (R = control key)
Parameter Parameter value Remarks
Paging system Yes
Search duration <10 to 360 seconds>
Pager subscriber No. <SC No.> Subscriber Configuration
Pager with text display Yes / No Subscriber Configuration