Ascotel IntelliGate 2025/2045/2065
Part 2 Routing elements 221
If both analogue and digital network interfaces are being used, one trunk group
has to be entered in each route for the analogue interfaces and one trunk group
for the digital interfaces since a trunk group can only contain either analogue or
digital interfaces.
Initialization Settings
• After initialization, route 1 is allocated trunk groups 1 and 2.
• After initialization, route 3 is allocated trunk group 1
(route for remote alarming).
• On 2025 and 2045 systems all routes are allocated the numbers from 170
upwards in the numbering plan.
• On the 2065 system the first 30 routes are allocated numbers from 170
upwards in the numbering plan.
4.2.3 Other Routing Functions for Outgoing Calls
Restricting Calls Outgoing Simultaneously
The "Outgoing connections" setting is used to specify the number of outgoing
calls that are possible simultaneously. Once the limit has been reached, subscrib-
ers can no longer make outgoing calls with the allocation of this route. This is sig-
nalled by means of the congestion tone.
Activating / Deactivating External Digit Barring
Normally an outgoing call is compared with the external digit barring allocated in
the subscriber configuration.
The "digit barring, ext" setting is used to deactivate the external digit barring for
each route. This is useful when a route is set up for calls into the private leased-
line network.
Deleting the exchange access prefix
If the call number of an outgoing call has an exchange access prefix, it will be trun-
cated before the call is forwarded.
To Next Page
Loading...
