Ascotel IntelliGate 2025/2045/2065
154 Ascotel Information Management System (AIMS) Part 1
10.5.1 Working offline (AIMS database)
With the AIMS database you can only work in offline mode. The following func-
tions are available:
Open
All the data from the selected PBX is loaded from the AIMS database into the PC's
main memory and made available for editing on the AIMS Shell or in an AIMS
Manager. Modified parameters are signalled in the menu tree by a check mark.
Close
The AIMS database is closed. If data was modified, the system will ask whether
you want to save the changes.
Note:
The changes and the check marks are retained even if the database is
closed without saving.
Save
After editing, the modified data is written from the PC's main memory into the
AIMS database and the check marks on the modified parameters are deleted.
Backup
The "Backup" function on the AIMS Shell stores the PBX data from the PC's main
memory on to a backup file specified by the user. If the current PBX data is to be
saved, it must first be loaded into the main memory using "Download".
Tip:
Make two backup diskettes of the PBX data: Keep one with the system
and give the other to the Installer.
Restore
The Restore function loads all the PBX data from a backup file into the AIMS data-
base. The data can then be transferred to the PBX using the Upload function.
To Next Page
Loading...
