Aastra Ascotel IntelliGate 2065 - 4.6.12 Overload code displays

Ascotel IntelliGate 2025/2045/2065
Part 7 Operations supervision 953
4.6.12 Overload code displays
The overload code displays on the DECT handsets can be activated and deacti-
vated using the following key combination (toggle function):
1)
Long-click key 5 and then long-click key 3 (long-click = > 2 seconds).
The overload code display is always deactivated after system initialization.
Tab. 7.39: DECT overload code displays Office 135 / Office 155pro
Tab. 7.40: DECT overload code displays Office 100 / Office 150
1)
Office 135: Possibly only as of software version 2.00.
Code Name Error description Error handling
05 / 06 IPEI Not Accepted Handset already logged on to system
under different number.
• Check existing subscriber No.
under "Config."; log that particu-
lar subscriber off
•Try again
10 Authentication
failed
Logon error • Try again
51 DL 04 Expiry Timer (on handset) has expired • Try again
70 Timer Expired MM timer in system has expired (dur-
ing logon)
•Try again
44 Failure to set up
traffic bearer
Connection cannot be set up as too
many handsets are phoning within
the same range
•Try again
• If still unsuccessful after several
attempts, "Reset Handset" (nor-
mally it is enough to press key 0
with a long keystroke and switch
back on)
45 No Quiet Channel No channel available, same as code
44
Same measures as for code 44
Code Name Error description Error handling
05 IPEI Not Accepted Handset already logged on to system
under different number.
• Checking existing
subscriber No
• Log subscriber off under "Config."
•Try again
OD Timer Expired Timer in system has expired • Try again
10 Authentication
failed
Logon error • Try again
31 System busy System overload • Try again later
41 Unsuccessful Power
Up
Power-up failed; handset remains in
"sleep" mode
•Try again
– If unsuccessful, "Reset Handset"