Ascotel IntelliGate 2025/2045/2065
712 Mounting the PBX Part 4
2.4 Horizontal mounting
Under certain circumstances a PBX can also be mounted horizontally (e.g. lying
inside a 19" cabinet). The PBX location requirements in Tab. 4.1 are to be
observed. Particular attention has to be paid to convection (provide fan if
required).
Warning:
For heat reasons the basic system 2065 can only be fitted horizontally if
it is operated together with the external auxiliary terminal power supply
(ATPS) (or when using the rack version, with an integrated fan).
2.5 Rack version Ascotel IntelliGate
With the greater IP integration of Ascotel IntelliGate systems all systems are also
available in rack versions. The scope of performance and functionality do not dif-
fer from those of systems of the ”wall mounting” type. This means that all the
information contained in the Ascotel IntelliGate system documentation is also
valid for the rack versions. The extra letter "R" in the designations indicates a rack
version.
Tab. 4.2: Designations of rack versions
Unlike the mounting set used for installing a PBX vertically into a 19" cabinet, the
rack versions are genuine 19" plug-in units for horizontal installation, with the fol-
lowing advantages:
• Only 5 HM (height modules) instead of 12 HM on the mounting set
• All user-network, network and special interfaces on the basic systems and
expansion cards are accessible on the front panels and can be designated with
labels.
• The rack plug-in unit with the integrated Ascotel IntelliGate system is designed
so that the fully cabled system can be removed from the rack plug-in unit like
a drawer, providing full access to the control elements such as the HEX rotary
switch, Reset button, EIM card, etc. If required, the drawer can be completely
removed from the rack plug-in unit by releasing the side locks (see Fig. 4.6).
Basic systems designation Systems designation
2025R / 2045R basic system Ascotel IntelliGate 2025R / 2045R
2065R basic system Ascotel IntelliGate 2065R
To Next Page
Loading...
