Ascotel IntelliGate 2025/2045/2065
Part 4 Mounting the PBX 713
• It is also possible to replace expansion cards with the system pulled out. Simply
disconnect the connections to the expansion cards that need to be replaced.
Make sure you disconnect the system from the power supply first (see "Install-
ing and removing cards", page 904).
• The 2065R basic system is supplied with an integrated fan, which is powered
by a plug-in power supply unit (supplied).
[1] Cabled interfaces of the mainboard with designation labels
[2] Basic front panel
[3] Locks on the rack plug-in unit
[4] Basic system 2025R / 2045R
[5] Apertures for cabling
Fig. 4.6: Ascotel IntelliGate 2025R / 2045R in its basic configuration
Basic Front Panels
The basic front panel is fitted differently depending on the system. The interfaces
between the expansion cards and the basic front panel are connected using pre-
fabricated 16-wire cables, which are available in lengths of 0.5 or 2 m
[1]
[2]
[3]
[4]
[5]
haz1363aaxxa0
To Next Page
Loading...
