Aastra Ascotel IntelliGate 2065 - 10.6 Import; Export; 10.7 Importing data from older systems; 10.8 Licensing concept

Ascotel IntelliGate 2025/2045/2065
Part 1 Ascotel Information Management System (AIMS) 157
10.6 Import / Export
The Import / Export function allows the user to import data tables (abbreviated
dialling numbers, DDI numbers and names, subscriber numbers and subscribers
names, terminal data) into the AIMS database or to export such tables from the
database. The exported tables are stored in Excel format and can then be sorted
or modified.
10.7 Importing data from older systems
In AIMS you can import system data from AIMS 4.x databases. For this to work,
AIMS 4.x has to be installed before.
Similarly it is possible to transfer files with system data from the Project Manager
to the AIMS database using AIMS.
The Application Notes and Frequently Asked Questions (FAQs) in connection with
AIMS can be downloaded from the Internet under "https://pbxweb.aastra.com".
10.8 Licensing concept
Some of the features (e.g. system licence upgrade 2025 → 2045, CTI interface,
QSIG, etc.) are protected ni the PBX by a licence code. This type of data can also
be configured without the corresponding code.
The licence conditions are set out in a list and can be viewed under "Basic setup"
in the system configuration in the AIMS Configuration Manager.
Checking the features subject to licensing conditions
If the "Licensing" feature is defined and activated in AIMS, features subject to
licensing can be modified offline in AIMS; if not, the appropriate warning will
appear on the screen.
If the Upload function is used to load the configuration data into the PBX, it will
first check the licence code. If the code is invalid or missing altogether, the user
will be warned by an error message. The configuration is retained and the Upload
process is continued.