Aastra Ascotel IntelliGate 2065 - 8.4.8 Making calls with your own settings on a third-party telephone

Ascotel IntelliGate 2025/2045/2065
Part 2 Features 489
System configuration
Tab. 2.205: Duplex mode: System configuration
Reference to Other Features
8.4.8 Making calls with your own settings on a third-party
telephone
This feature allows an authorized user (internal subscriber) to use a third-party ter-
minal with his valid password to make a single call with the following personal
settings:
• Internal and external digit barring settings
• Charge counters
•CLIP display
Detailed Description
After the unlock procedure #36 the user dials his own internal subscriber number
and his personal password. This activates the digit barring settings of his sub-
scriber connection and the call charges are charged to his charge counter: The
called party sees the caller's subscriber number and not the number of the termi-
nal being used by the caller.
For reasons of data protection no entry is made in the redial register.
This same function is also used to unlock locked terminals to make a single call.
For more details on this feature and how to set the password, see "Unlocking the
terminal for each call", page 511.
Once the function has been activated, the user has the possibility to redial within
12 seconds without going on-hook; alternatively he can go on-hook and then dial
within 60 seconds using prefix dialling.
Parameter Parameter value Remarks
Announcements Yes Subscriber Configuration
Message and announcement groups <SC No.>
Features:
• "Announcement to one or more subscribers", page 483