EasyManua.ls Logo

Aastra Ascotel IntelliGate 2065 - 3 System Interfaces

Aastra Ascotel IntelliGate 2065
1014 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ascotel IntelliGate 2025/2045/2065
Part 1 System Interfaces 59
3 System Interfaces
The following table provides an overview of the system's different interfaces and
their design:
Tab. 1.2: System interfaces and channels
Term Explanation
B channel User information channel: Each connection occupies one user
information channel, e.g. 2 user information channels (connec-
tions) can be occupied simultaneously using one basic access.
D channel Control and signalling channel: Channel for control and signalling
as well as for packet data transfer.
2B+D / 30B+D 2 2 B channels and 1 D channel / 30 B channels and 1 D channel
Ports Physical connection points on the PBX for network interfaces and
user-network interfaces
Network interfaces Network-side connection possibilities for the PBX
Analogue network interface
(a/b network interface)
An analogue network connection has 1 user information channel.
Basic Access T Digital network interface 2B+D
Primary rate access T2 Digital network interface 30B+D
Basic access S external Digital network interface 2B+D:
A user-network interface S configured as "EXTERNALS".
User-network interfaces User-side connection options for the PBX
Analogue user-network interfaces
(a/b user-network interface)
An analogue user-network interface has 1 user information chan-
nel.
ISDN user-network interface
(S user-network interface)
Digital user-network interface 2B+D:
Connection for Euro ISDN terminals, PC Operator or paging sys-
tem.
AD2 user-network interfaces
(AD2 user-network interface)
Digital user-network interface 2B+D:
A maximum of two AD2 system terminals, one system terminal
and a Pocket Adapter, or one DECT radio unit can be operated on
a proprietary AD2 bus.
Special interfaces Other PBX connection possibilities
Ethernet interface on the basic sys-
tem
central interface for connecting AIMS or a CTI server, directly or
via LAN
Ethernet interface on the expansion
card AIP 6400
Interface to an IP network for networking Ascotel systems
Ethernet interfaces on the expansion
card AIP 6350
Interface to an IP network for linking up IP system terminals to an
Ascotel IntelliGate system
V.24 interfaces Serial data interface
Door Intercom Systems Special interface for connecting door intercoms
General Bell Special interface for general bell

Table of Contents

Other manuals for Aastra Ascotel IntelliGate 2065

Related product manuals