Ascotel IntelliGate 2025/2045/2065
Part 2 Routing elements 247
4.7.2 Routing Functions for Outgoing Calls
The following outgoing routing settings are grouped together in the subscriber
configuration:
• Classes of service:
– Exchange access authorization
– Priority exchange allocation (see page 299)
– Digit barring, external (see page 288)
– Digit barring, internal (see page 268)
– Partial rerouting (see page 328)
– Least Cost Routing (see page 304)
• Outgoing call number for PISN subscribers
• Route allocation
• Forcing the route if the LCR function if activated (see page 317)
Classes of Service
Enable or restrict authorization to make outgoing phone calls to the public net-
work from an allocated terminal. The following are excluded from the barring:
• Dialling abbreviated dialling numbers
• Dialling the emergency number
• Dialling PISN subscriber numbers
Call Number of the PISN Subscriber for Outgoing Calls
If a PISN subscriber is in a virtual network, his external (DDI) number will be listed
here without the exchange access prefix. If a PISN subscriber is in a fixed network,
a number is not usually entered here (see "Call to the private Leased-Line Net-
work", page 301).
For a more detailed description of which subscribers of a different PINX can be
entered as PISN subscribers, see "Shared Numbering Plan", page 175.
Route allocation
This setting allocates a route to the subscriber.
In the case of an internal subscriber this route is used to route calls that were
dialled with an exchange access prefix (except route selection). If the LCR function
To Next Page
Loading...
