Aastra Ascotel IntelliGate 2065 - 10 Ascotel Information Management System (AIMS); 10.1 AIMS Shell

Ascotel IntelliGate 2025/2045/2065
144 Ascotel Information Management System (AIMS) Part 1
10 Ascotel Information Management System
(AIMS)
The Ascotel Information Management System (AIMS) is a software package used
for the planning, configuration and monitoring of the system.. The planning and
configuration can be prepared offline by the telecom specialist and then loaded
on to the system locally, via LAN or via the ISDN network Remote access means
that changes and expansions can be carried out independently of time and loca-
tion, and is used for the remote maintenance of the system. The remote alarming
function ensures that malfunctions are automatically reported to a maintenance
centre via the System Event Manager (SEM). The broad spectrum of this functional
management concept is complemented by call data acquisition, Least Cost Rout-
ing (LCR) and a hotel application. For the installation and settings of the interfaces
for AIMS of the dial-up networking, see "Connection options", page 837 e "Set-
tings", page 840.
AIMS runs under all the usual Windows operating systems. AIMS comprises the
following program managers:
• Configuration Manager (CM)
• Fault & Maintenance Manager (FM)
• Account Manager (AM)
• Hotel Manager (HM)
• Information Manager (IM)
• Project Manager (PM)
• Upload Manager (UM)
• Voice Mail Manager (VMM)
• IP Gateway Manager (GM)
• System Event Manager (SEM)
The Upload Manager (UM) and the System Event Manager (SEM) are not available
in all sales channels.
10.1 AIMS Shell
The AIMS Shell is used to administer the PBX and PINX, to regulate the access
authorizations and to set the online parameters. The numbering plan for a private