Ascotel IntelliGate 2025/2045/2065
588 Expansion Stages Part 3
Number of special cards per system
Tab. 3.13: Max. number of special cards of one particular type per PBX
2.5 Component Mounting Rules and Examples
2.5.1 Component mounting rules
Besides the expansion limits specific to the cards, the following rules are to be
observed with regard to fitting components:
• With the exception of the ISDN-02PRA card all the expansion cards can be used
in all the systems. When the system is started up, however, only as many inter-
faces are enabled as are permitted by the expansion limits (see "System and
Expansion Limits", page 592).
• On the basic system 2025 / 2045 the user-network interfaces on the main-
board are enabled before those on the expansion cards.
• The expansion cards are enabled "from left to right" and the interfaces on the
expansion cards "from bottom to top". Rule: the lower designations come first
(see also Fig. 3.4).
• If a limit value is reached when starting up the system or registering the cards,
it is possible that not all the cards or not all the interfaces of the last card can
be enabled.
• Voice Mail cards are considered as 2 or 4 analogue user-network interfaces
during logon.
Card type Max. number for Ascotel IntelliGate
2025 2045 2065
AIP -6400 (basic card IPI-100BT) 1 2 4
AIP -6350 (basic card IPI-100BT) 1 2 4
Total AIP -6400 + AIP -6350 1 2 4
VM-02P/VM-04P 1 1 1
OI-2DOOR 1 1 1
DSP-01 / DSP-02 1 2 4
DSP-04 1 1 2
Total DSP-01 + DSP-02 + DSP-04 1 2 4
To Next Page
Loading...
