Ascotel IntelliGate 2025/2045/2065
446 Features Part 2
If the call was forwarded to C and was not answered by B, the next call will imme-
diately be signalled to both subscribers B + C. The delay in the call to C is reacti-
vated only once the call has been answered directly by called party B.
Fig. 2.165: Call Forwarding on No Reply
Call Forwarding on No Reply responds differently depending on the system con-
figuration and the procedure used.
•Normal CFNR:
The subscriber specifies the chosen call forwarding destination on his terminal.
• Preconfigured CFNR:
The call forwarding is made to a destination entered in the subscriber configu-
ration.
• CFNR can also be effected for both types if subscriber B is busy. For this the
option "CFNR if busy" must be activated in A’s subscriber configuration.
Detailed Description
Tab. 2.137: Call Forwarding on No Reply
Note:
The internal number of a call distribution element is not possible as the destina-
tion for Call Forwarding on No Reply.
Interface Operating sequence / signalling on the terminal Scope
B Once the feature has been activated, B obtains
an acknowledgement tone.
C Possible destinations:
• Subscribers: internal, external
1)
, PISN
• PS/coded ringing
• UG: 17 to 21 (2025 / 2045 system) or 25
to 29 (2065 system) and user groups
configured as "large".
Requirement:
C is not protected against calls (Do not dis-
turb, *26) or Call Forwarding Uncondi-
tional (*02).
1)
If caller A is an external subscriber or a virtual PISN subscriber, the settings authorising exchange-to-
exchange traffic (see "Call Forwarding Unconditional to exchange", page 441) will have to be observed.
(If the connection is not authorized, the call is not forwarded.)
BA C
haz0222aaxxb0
To Next Page
Loading...
